As we wash our clothes when they are dirty (to make them look vibrant again), we ought to take care of our Airpods pro, smartphones, and other gadgets. Regular cleaning and maintenance will ensure that the Airpods pro is in good shape and functioning at its best.
Overview of steps to maintain AirPods Pro performance
Store your AirPods pro in their case when not in use.
Keep your hands off the case.
One earbud should only be used at a time to conserve power.
Avoid extreme temperatures.
Give the smart features a break to save some power.
Lower the volume to some reasonable level
Cleaning the Ear Tips
1. Removing ear tips from the AirPods Pro
Pinch the tip of the AirPod Pro with your thumb and fingers while holding the device in one hand. Pull hard on the base of the ear tip, which is where it is joined to the AirPod, with your fingers to remove one ear tip.
2. Washing ear tips with warm, soapy water
Since you’ll be utilizing warm soapy water for this, it’s easier to clean the AirPods Pro if you remove the silicone ear tips first. This also helps prevent unintentional damage to the AirPods Pro. Using the clean, lint-free cloth, clean the exterior of the ear tips after rinsing the ear tips in the previously prepared solution of soapy water.
3. Drying and reattaching ear tips
Wipe up any lingering water (to avoid damage) by using your clean, lint-free cloth. Before re-applying the ear tips, make sure they have had enough time to dry.
Cleaning the AirPods Pro Earbuds
1. Use a soft, dry lint-free cloth
Use a clean, lint-free cloth to clean your AirPods Pro. For better results, lightly spritz the cloth with isopropyl alcohol. Remember to also submerge the cotton swabs (if you’re using one) in the isopropyl alcohol. After that, use them to clean the mesh and debris in the earphones.
2. Gently brush the speaker grills with an anti-static brush
Ensure to use the gentle brush on each earbud and speaker to remove any tiny, more difficult-to-remove dirt or debris. Once more, you must be cautious when brushing so as not to harm the mesh.
3. Avoiding the use of sharp objects or excessive force
Since the speaker is soft and sensitive, you must be gentle on it. Because of its fragility, if too much force is exerted, the speaker may tear. For very tiny dirt, toothpicks are safer and more effective than other sharp tools. But, you must still use the toothpick with caution to avoid harming the speaker mesh.
Cleaning the Charging Case
1. Wiping down the exterior with a soft, damp cloth
Clean the exterior of the charging case with a lint-free cloth, then clean the interior of the case with a Q-tip. If it doesn’t work, use a cotton swab or a cloth lightly dipped in isopropyl alcohol to wipe the dirt off your case.
2. Cleaning the lightning connector with a dry, soft-bristled brush
In all you do, avoid trying to blow the dirt out because blowing it could insert saliva particles that could moisten the contact points. You can use a dry, soft-bristled brush instead. Always prevent fluids from entering the charging ports.
3. Ensuring the case is dry before closing
Although Airpods pro comes with some water resistance capabilities, it is still advisable that you let your Airpods pro case dry properly before closing it. While water may not do immediate damage, leaving water in the case for a long time could spell doom for your Airpods pro.
Maintaining Battery Health
1. Keeping AirPods Pro and the charging case at room temperature
Your AirPods’ batteries can be harmed by extreme conditions (hot or cold). Avoid using your AirPods in bad weather and avoid leaving them in the sun while not in use to extend their battery life. The AirPods and case should not be kept in an area that is frequently hot or cold.
2. Avoiding overcharging and using Apple-approved chargers
The battery level should be displayed for 8 seconds via the status light. While placing your AirPods Pro on the charging pad, you can simply tap the case to confirm that it’s charging (an amber light will appear) or is charged up (green light will appear). Don’t leave it plugged in once it’s fully charged and always use the Apple-recommended charging mat.
3. Storing AirPods Pro in their charging case when not in use
Keep your AirPods in their charging case whenever not in use because, depending on the model, it can extend their battery life by up to 30 hours. By doing this, they will be prepared for use whenever you need them.
Firmware Updates
1. For optimum performance, the AirPods Pro firmware should be updated often
When your AirPods are charging and within Bluetooth range of your iPhone, iPad, or Mac, firmware updates are regularly provided.
2. Connecting AirPods Pro to an iPhone or iPad for automatic updates
You don’t need to upgrade your AirPods because firmware updates happen automatically. All you need to do is ensure that your AirPods pro is connected to an iPhone or iPad.
3. Verifying the current firmware version
Make sure you have the most recent version of iPadOS or iOS on your iPhone or iPad to utilize them to check that your AirPods are up to date. To verify the current firmware version, click the Info button next to the name of your AirPods under Bluetooth in Settings. The firmware version can be found in the About section by scrolling down.
Proper Storage and Handling
1. Storing AirPods Pro in their charging case when not in use
Keep your AirPods in their charging case whenever not in use because, depending on the model, it can extend their battery life by up to 30 hours. By doing this, they will be prepared for use whenever you need them.
2. Avoiding extreme temperatures, moisture, and direct sunlight
Airpods pro are safe to use at room temperature or where the outside temperature ranges from 32 degrees Fahrenheit to 95 degrees Celsius. The device may alter its behavior to regulate its temperature when it is exposed to too-low or too-high-temperature situations. Using AirPods outside of their recommended working range may cause the device to switch off or briefly reduce battery life. When you put the gadget back in a warmer environment, the battery life will resume. While using AirPods in extreme heat, the battery life may be permanently shortened. Keep your AirPods somewhere that is between -10° and 45° C (14° and 113° F) in temperature. Lastly, because parked cars can get hotter than this range of temperatures, don’t leave your AirPods in your vehicle.
3. Using protective cases and accessories to prevent damage
Scratches can be avoided by using AirPods Pro cases to guard against cosmetic harm. Even if you don’t frequently drop the case, other objects in your backpack or purse may scratch it without you knowing.
Troubleshooting Common Issues
1. Addressing sound quality or connectivity problems
- On your linked iPhone, iPad, iPod touch, or Mac, confirm that the most recent software is installed.
- Make sure the device you’re linked to is close by and that there are no obstacles or wireless interference in your path to it.
- To determine if the problem is caused by the app, listen to audio from another app.
2. Resetting AirPods Pro to factory settings
- Place your AirPods inside the charging case, then snap the lid shut and pause for 30 seconds.
- Put your AirPods in your ears after opening the charging case cover.
- Navigate to Bluetooth Settings. If your AirPods pro is listed as being linked there, hit the “More Details” button next to them, choose to Forget This Device, and then tap the screen once more to confirm.
- When the status light on the front of the case flashes amber and then white, press and hold the setup button on the case’s back for approximately 15 seconds.
- Reconnecting your AirPods requires you to put them close to your iPhone or iPad when the charging case’s lid is open and the AirPods are inside. Follow the actions listed on your device’s screen.
Note: One Apple ID can be used to link several AirPods. Someone must first delete the AirPods from their Apple ID before they may use their third-generation or first- or second-generation AirPods Pro.If you’ve tried all you can and it seems not working, then you should contact professionals at Apple help.
Conclusion
The importance of cleaning and maintenance cannot be overstated as it has a lot to do with the optimum effectiveness and efficiency of your Airpod pro.It’s a good idea to clean your AirPods after 72 hours of use to prevent an excessive buildup of foreign objects inside the headphones. You should wipe your AirPods down with a tissue or lint-free cloth after each usage to prevent oil buildup on the surface.
Besides keeping your Airpod pro safe from dirt, regular care can boost performance and make the device last longer. For instance, if you do not take care of your Airpod or you don’t keep it under the right temperature the battery life may begin to degrade.
After all said and done, it will be wise for you to invest in proper care and protection for your AirPods pro. Yes, it may be a little pricey but it’s worth every penny. Don’t leave your Airpods unprotected. Get your AirPods pro a protective case.
You May Also Like to Read:
Top 8 AirPods Pro Accessories: Elevate Your Listening Experience
