If your Apple Pencil won’t connect to your iPad, start by checking which Pencil you have. Apple Pencil Pro, Apple Pencil (USB-C), Apple Pencil (2nd generation), and Apple Pencil (1st generation) each pair differently.
One mistake comes up a lot: attaching an Apple Pencil (USB-C) to the side of the iPad and waiting for it to connect. On that model, the magnet only holds the Pencil in place for storage. To pair it, you need a USB-C cable.
If you’re already using the correct pairing method, follow the steps below to identify the problem.

Which Apple Pencil Do You Have?
A wrong pairing method can look like a Bluetooth issue. Check your Pencil model first.
| Apple Pencil | How It Pairs | Common Mistake |
|---|---|---|
| Apple Pencil Pro | Attach it to the magnetic connector on the side of a compatible iPad. | Using it with an iPad that doesn’t support it. |
| Apple Pencil (2nd generation) | Attach it to the magnetic connector on the side of a compatible iPad. | Mixing it up with Apple Pencil (USB-C). |
| Apple Pencil (USB-C) | Connect it to the iPad with a USB-C cable. | Expecting the magnet to pair it. |
| Apple Pencil (1st generation) | Plug it into the Lightning connector, or use the USB-C to Apple Pencil Adapter and a cable on iPad models that need it. | Plugging it into a USB-C iPad without the adapter. |
To check your iPad model, open Settings > General > About.
Apple keeps a current list of which Pencil works with which iPad, including which models need the adapter for the 1st-generation Pencil: Apple Pencil compatibility. Apple also has a guide to identify, connect, and pair each model: How to connect and pair your Apple Pencil with your iPad.
How to Pair Your Apple Pencil Correctly
Apple Pencil Pro and Apple Pencil (2nd Generation)
Both models pair and charge through the magnetic connector on the side of a compatible iPad.
- Make sure Bluetooth is on.
- Place the Pencil on the magnetic connector along the side of the iPad.
- Make sure it is aligned with the magnetic connector, then leave it in place while it pairs.
Apple Pencil (USB-C)
The Apple Pencil (USB-C) pairs through a USB-C cable, not through its magnetic attachment.
- Slide open the end of the Pencil to reveal the USB-C port.
- Plug in a USB-C charging cable.
- Connect the other end of the cable to the iPad.
- Tap Tap to Connect when the prompt appears.
Once it’s paired, you can unplug the cable. The Pencil also charges through USB-C.
Apple Pencil (1st Generation)
On an iPad with a Lightning connector:
- Remove the cap.
- Plug the Pencil into the iPad.
- Tap Pair when the button appears.
Some USB-C iPad models, including iPad (10th generation) and iPad (A16), need the USB-C to Apple Pencil Adapter for Apple Pencil (1st generation), according to Apple’s compatibility page. Plug the Pencil into the adapter, connect the adapter to the iPad with a USB-C cable, and tap Pair when it appears.

If Your Apple Pencil Still Won’t Pair
The steps below follow Apple’s guide if you can’t pair your Apple Pencil with your iPad.
Before You Start
- Update your iPad to the latest software. Some Pencils require a minimum iPadOS version, including Apple Pencil Pro and Apple Pencil (USB-C).
- Make sure your Pencil works with your iPad.
- Charge the Pencil if needed.
Then go through these steps in order.
1. Connect the Pencil, Then Restart the iPad
Connect the Pencil using the right method for your model, and keep it connected while the iPad restarts. This applies to all four types:
- Apple Pencil Pro and 2nd generation: keep it attached to the magnetic connector.
- Apple Pencil (USB-C): keep it plugged in with the USB-C cable.
- Apple Pencil (1st generation): keep it plugged into the Lightning connector, or into the adapter and cable.
When the iPad turns back on, try pairing again.

2. Forget the Apple Pencil and Pair It Again
Open Settings > Bluetooth and make sure Bluetooth is on. If your Apple Pencil is listed under My Devices, tap ⓘ next to it and choose Forget This Device. Reconnect the Pencil using the right method for your model, then wait for the Pair button.

3. If the Pair Button Doesn’t Appear, Let It Charge
Leave the Pencil connected for about a minute, then try again. The Pencil may need a little charge before it will pair.

4. Remove the Case (Pro and 2nd Generation)
If you have an Apple Pencil Pro or an Apple Pencil (2nd generation), take off the iPad case or cover, attach the Pencil directly to the magnetic connector, and try again. For these two models, this is the last thing Apple suggests before service.

“Pairing Took Too Long,” or Apple Pencil Is Grayed Out
If you see “Pairing took too long,” or the Pencil appears grayed out in Bluetooth, try the same steps. Forget the Pencil, reconnect it, and leave it connected for a minute or so. If it still won’t pair, restart the iPad with the Pencil connected and try again.
You don’t need to erase or reset your iPad for this. That isn’t part of Apple’s pairing steps.
iPad Doesn’t Recognize Your Apple Pencil, or It’s Not Showing in Bluetooth
If your iPad doesn’t recognize the Pencil, go back to the table above and make sure you’re using the right pairing method for your model. Then open Settings > Bluetooth and check that Bluetooth is on.
If the Pencil is compatible and connected correctly but still doesn’t appear in Bluetooth or prompt you to pair after these steps, contact Apple Support.
If You Use an ESR Pencil
If you use an ESR pencil rather than an Apple Pencil and it isn’t working with your iPad, check the steps below for your model. You may need to pair it over Bluetooth or simply turn it on, depending on which pencil you have.

ESR Geo Digital Pencil with Built-in Find My
An iPad digital pencil with Bluetooth pairing and built-in Find My support. It charges over USB-C and does not support magnetic or wireless charging.
View ESR Geo Digital PencilThe ESR Geo Digital Pencil with Built-in Find My has a power button at the top end. Press and hold it for 2 seconds to turn the Pencil on. It enters pairing mode automatically, so go to Settings > Bluetooth and select ESR Geo Digital Pencil. A steady blue light means the Pencil is on. If the light flashes while you’re using it, the battery is below 10%.
To use Find My, add the Pencil in the Find My app too. Open Items > Add Item > Other Supported Item, then tap Connect when ESR Geo Digital Pencil appears. Stay in the Find My app while you pair. The Pencil only broadcasts for about 3 minutes after you turn it on, so if it hasn’t connected by then, turn it off and on again.

If you removed the Pencil from Find My while it wasn’t connected, it may not show up the next time you try to pair it. Press and hold the top for 20 seconds until you hear a sound, then release to clear its pairing data.
It charges over USB-C only and doesn’t support magnetic or wireless charging.
ESR Digital Pencil for iPad
A USB-C rechargeable iPad stylus that can be used without Bluetooth pairing. Turn it on with a quick double-tap on the top.
View ESR Digital Pencil for iPad
The ESR Digital Pencil for iPad doesn’t need Bluetooth pairing. Double-tap the top of the Pencil quickly to turn it on, then start using it. A single tap or a slow double-tap won’t work.
If it stops responding, double-tap the top again. It has a 5-minute auto-sleep time. If it won’t turn on, charge it with the USB-C cable. A full charge takes about 30 minutes. The three status lights near the USB-C port show the battery level. It charges over USB-C only and doesn’t support magnetic charging.
Check the product page to confirm that your ESR Pencil is compatible with your iPad. If it still doesn’t work, contact ESR Support and let them know what you’ve already tried.
When to Contact Apple Support
If you’ve completed the steps above and your Apple Pencil still won’t pair, contact Apple Support. Tell them which Pencil and iPad you have, and which steps you’ve already tried.
Apple Pencil Pairing FAQ
Why won’t my Apple Pencil connect to my iPad?
First, confirm that your Apple Pencil is compatible with your iPad and that you’re using the correct pairing method. Apple Pencil Pro and Apple Pencil (2nd generation) pair through the magnetic connector, Apple Pencil (USB-C) pairs with a USB-C cable, and Apple Pencil (1st generation) pairs through Lightning or the required USB-C adapter.
Does Apple Pencil (USB-C) pair magnetically?
No. Its magnetic attachment is for storage. To pair Apple Pencil (USB-C), connect it to the iPad with a USB-C cable and tap “Tap to Connect” when the prompt appears.
What should I do if the Apple Pencil Pair button doesn’t appear?
Leave the Pencil connected for about a minute so it can charge, then try again. If needed, restart the iPad while keeping the Pencil connected using the correct method for that Pencil model.
Why is my Apple Pencil grayed out in Bluetooth?
Forget the Apple Pencil in Settings > Bluetooth, reconnect it using the correct pairing method, and leave it connected for about a minute. If it still won’t pair, restart the iPad with the Pencil connected and try again.
Does the ESR Digital Pencil for iPad need Bluetooth pairing?
No. Double-tap the top of the Pencil quickly to turn it on, then start using it. If it doesn’t turn on, charge it with a USB-C cable and try again.
How do I pair the ESR Geo Digital Pencil?
Press and hold the top button for 2 seconds to turn it on. Then open Settings > Bluetooth and select ESR Geo Digital Pencil. To use Find My, add it separately in the Find My app under Items.